How To Remove Bike Chain Without Master Link? (Best solution)

For a standard chain that does not have a master link, seat the chain in the chain tool such that the pin of the chain tool aligns with a pin in the chain. If you have a standard chain with a master link, follow the steps below. Turn the handle of the chain tool until you are able to push the pin out far enough to break the chain with your hands.
What is the best way to remove a link from a bicycle chain?

  • Remove your chain from the chain tool and wriggle the link to separate it from the rest of the chain. Now that the rivet has been nearly completely pulled out of the link, the link should be rather easy to separate. Grab the bike chain with your fingers on each side of the link and jiggle it back and forth until the link falls apart. Remove your bike’s chain from the vehicle.

Do all bike chains have a master link?

These connections are not available on all bicycles. BMX bikes, single speed bikes, and three-speed town cycles with internal gears are the most common vehicles on which they may be found. Generally speaking, the more sprockets are present on the rear cassette of a bicycle, and the narrower that cassette is, the less space is available for this extra-wide master link.

You might be interested:  How To Measure Your Head For A Bike Helmet? (Solved)

How do you fix a chain without a master link?

A chain pin can be used in the event that your chain does not have a master link. A chain tool can be used to join your old and new chains together, and a new chain pin can be used to connect your old and new chains together. It is usually preferable to start with a new chain pin rather than using an old one when making repairs to existing chains.

Do Shimano chains have a master link?

Even Shimano, on the other hand, is suddenly changing its tune, and its most recent 11 and 12 speed chains are now offered with master links.

How do you break a chain without a bolt cutter?

Instead of using bolt cutters if you don’t have any on hand, or if you have a tough metal chain that bolt cutters will not cut through, you may use a saw. There are a plethora of saws available that are capable of cutting through a chain with ease. Select a saw to put to work.

  1. Hacksaw
  2. metal grinder, such as an angle grinder
  3. reciprocating saw
  4. coping saw
  5. a variety of other tools.

How do you break a chain Quick Link?

To disengage this sort of link, place one jaw of your pliers on the chain pin and the other jaw on the open end of the clip, as shown in the illustration. Afterwards, press your pliers together until the clip comes loose. Then you may slide out the rest of the link by removing the outer plate and sliding it out.

Leave a Reply

Your email address will not be published. Required fields are marked *